The new Makita HR5211C AVT SDS max rotary hammer provides more impact power and less vibration.
Powered by a 1500watt motor and weighing 11.6kgs, the HR5211C AVT has a low vibration rating of 12.5m/s2 in drilling mode and 11m/s2 in hammer mode with the D-side handle in use.
The 5211C AVT 11.6kg rotary hammer offers the power needed for the majority of drilling and demolition tasks. With a no-load rotary speed of up to 260rpm, drilling capacity of 52mm into concrete and 19.7 joules of impact power with up to 2,150 blows per minute available, the tool is a powerful, tough, yet safe machine.
It also features the 2-Mass rear handle system where the grip area is effectively disconnected from the main machine body by hinge and spring fixings, isolating the operator from any HAV risk.
In the list of control features are: a torque limiter should the drill bit snag; the automatic soft-start system which makes the motor accelerate up to speed; a constant speed feature and a variable speed control facility; and three mode selection of rotary, rotary-hammer and hammer only.
